the-plumbinator

How to Prevent Pipes from Freezing in Austin & Round Rock (Winter Plumbing Guide)

Tue, 05 May 2026 20:28:18 GMT

How to Prevent Pipes from Freezing in Austin & Round Rock (Winter Plumbing Guide)

At What Temperature Do Pipes Freeze in Texas?

As we’ve seen this year in Central Texas, winter has a habit of sneaking up on us. One week it’s 70 degrees, the next there’s a hard freeze in the forecast and everyone is scrambling for faucet covers.

A common question we hear is: at what temperature do pipes freeze in Texas? In general, pipes can begin freezing when temperatures drop to 32°F , but the real risk increases when temps stay at 28°F or lower for several hours , especially overnight. Homes in Austin, Round Rock, and surrounding areas are particularly vulnerable because our plumbing systems aren’t always built or insulated for extended cold snaps.

Because our winters are usually mild, plumbing here isn’t always designed to handle prolonged freezing weather. That’s why winterizing your plumbing — even for a short cold front — matters more than people think.

We’re here to make sure you’re ready when the season inevitably rears its ugly head again.

Why Pipes Burst

When temperatures drop, water inside pipes can freeze and expand. That expansion puts pressure on the pipe from the inside, which is what causes cracks and bursts . The damage often does not show up until the ice thaws and water starts flowing again, which is why freeze related plumbing problems tend to appear all at once.

How to Prevent Pipes from Freezing

How to Protect Outdoor Plumbing from Freezing

One of the simplest and most effective ways to prevent frozen pipes in Central Texas is protecting your outdoor plumbing. Exterior components are especially vulnerable because they’re directly exposed to cold air.

Here’s what to do before temperatures drop:

Disconnect and drain garden hoses – Leaving hoses attached can trap water inside the pipe and increase freeze risk.
Cover outdoor faucets (hose bibs) with insulated faucet covers to reduce direct exposure to cold air.
Drain irrigation lines to prevent water from freezing inside sprinkler pipes.
Shut off your sprinkler system before a hard freeze and relieve pressure in the lines.
Check exposed exterior pipes for proper insulation and add foam pipe insulation if needed.

Taking these simple steps can significantly reduce the risk of frozen or burst pipes during a Central Texas cold snap.

How to Prevent Pipes from Freezing Inside Your Home

Inside the house, the goal is to keep water moving and pipes warm — especially during a Central Texas freeze. Here are simple steps to help prevent frozen pipes:

Let faucets drip slightly during very cold nights – Moving water helps relieve pressure inside the pipe, which reduces the risk of frozen pipes and bursting .
Focus on faucets along exterior walls – These pipes are more exposed to cold air and are more likely to freeze.
Open cabinet doors under sinks – This allows warm indoor air to circulate around plumbing that may otherwise sit in a cold pocket.
Keep your thermostat consistent – Avoid lowering the temperature too much overnight during a freeze.
Seal drafts near plumbing areas – Check for gaps around windows, doors, or foundation walls where cold air could reach pipes.

These small adjustments can make a big difference in preventing frozen pipes in Austin and Round Rock homes during a winter cold snap.

Water Heater & Irrigation Protection

Water heaters deserve attention, too — especially during a Central Texas freeze. If your water heater is located in a garage or utility space that isn’t well insulated, it’s more exposed to temperature swings and at greater risk during cold weather. Making sure the surrounding area stays above freezing and that the unit is in good working condition can help prevent water heater issues when you need hot water the most.

It’s also smart to check for existing plumbing vulnerabilities before winter hits. Small leaks, aging pipes, loose fittings, or areas with poor insulation are far more likely to fail during freezing temperatures. Addressing those issues ahead of time is much easier — and far less expensive — than dealing with burst pipes, water heater damage, or water damage repair after a hard freeze in Austin or Round Rock.

Preventative winter plumbing maintenance can make all the difference when temperatures drop unexpectedly.

Austin Freezes Are Rare — But Frozen Pipes Aren’t

The biggest misconception about winterizing plumbing in Austin is that it isn’t necessary because freezes are rare. But when freezing temperatures do hit Central Texas, they tend to hit hard — and the plumbing damage can be widespread.

Frozen pipes, burst water lines , and water heater failures often happen all at once during a cold snap. A little preparation ahead of time can save significant money, stress, and emergency plumbing repairs when temperatures dip below freezing.

Winter may not last long in Austin or Round Rock, but your plumbing system still feels the impact. Taking a few preventative steps before the next freeze helps ensure your home stays dry, functional, and protected from costly water damage.

If you’re unsure whether your plumbing system is ready for the next cold front, a quick winter plumbing inspection can provide peace of mind before temperatures fall.

Do You Need a Plumber After a Freeze?

Not all freeze-related plumbing problems are obvious right away. In fact, many frozen pipes don’t show visible damage until temperatures rise and water starts flowing again.

You may need a licensed plumber after a freeze if you notice:

Sudden drop in water pressure
No water coming from certain faucets
Water stains on ceilings or walls
Dripping sounds inside walls
Puddles near sinks, water heaters, or exterior walls
A spike in your water bill

Even a small crack caused by freezing temperatures can turn into a major leak once the ice thaws. If you suspect a frozen or burst pipe in Austin, Round Rock, or surrounding areas, it’s best to have it inspected before minor damage becomes costly water repairs.

When in doubt, shutting off your main water supply and calling a professional can prevent thousands of dollars in water damage.

Frequently Asked Questions About Frozen Pipes in Texas

If you suspect frozen pipes, low water pressure, or water damage after a Central Texas freeze, don’t wait.

Schedule a winter plumbing inspection or call The Plumbinator at (512) 786-1771 for professional frozen pipe repair and winter plumbing inspections in Round Rock, Austin, Hutto, Georgetown, and surrounding areas.

A quick inspection now can prevent costly repairs later — and give you peace of mind before the next cold snap rolls in.

Essential DIY Plumbing Hacks for Sinks Toilets Disposals and Beyond

Tue, 05 May 2026 20:09:17 GMT

Essential DIY Plumbing Hacks for Sinks Toilets Disposals and Beyond

DO flush your hot water heater through the drain valve at least once per year to remove sediment build up. The sediment could harden, which makes your heater run less efficiently. If sediment continues to accumulate it can permanently damage the water heater.
DON'T ask a handyman to work on your water heater or ANY of your plumbing. It is illegal for a handyman to touch any plumbing, according to the Texas State Board of Plumbing Examiners. If anyone but you (the homeowner) works on your plumbing, they must be certified through the TSBPE as a Journeyman or Master plumber and be, or be working under, a Master Plumber in Charge. Allowing an unlicensed person to mess with your plumbing is both illegal and extremely dangerous, especially with water heaters, which can leak gas, explode, or scald. If a handyman destroys or floods your house, your homeowner's insurance will not pay out due to the illegal work. Read more here.
DO call us for a tankless water heater consultation if you have four or more people living in your house and often run out of hot water. Read more here.

If you've got a plumbing problem, don't hesitate to call The Plumbinator to come fix it. But by using this guide to preventative plumbing maintenance, you might have to call us less often!

Read on for DIY plumbing do's and don'ts.

Garbage Disposals:

DO Run cold water, not hot water, when the disposal is running. Cold water at full blast from the faucet helps grease to solidify and move with the water down the drain. Hot water will melt grease and could actually push it further down the drain and create a clog.
DON'T Grind ice or eggshells in your disposal to "keep the blades sharp". There are no blades in a disposal, only blunt impellers. Ice won't help, and egg membranes can get wrapped around the impellers and damage them.

Water Heaters:

Bathroom Sinks:

DO Try a plunger on small clogs in the drainpipe. A standard cup plunger might give the clog the extra push it needs to get moving. Make sure to put a few inches of water in the sink, and block the overflow drain with a wet rag, then plunge the sink firmly but gently. But...
DON’T attempt to plunge the sink like this if you have already poured a chemical drain cleaner into the sink, as they can splash all over you during plunging! Also, while we're on the subject - DON'T ever use harsh chemicals in the first place, they can damage your pipes and YOU.

Toilets:

DON’T pour hot water into your toilet to attempt to dissolve clogs. Toilets are designed for cold water, not boiling hot water, and the sudden temperature change will cause your bowl to crack and you'll need to call us to get a whole new toilet! Warm water should be ok, however.
DON'T flush anything but human waste and toilet paper. Dental floss will wrap around things and tangle, Band-Aids have sticky plastic parts that can get gummed up with clogs, and Q-tips get stuck in the flange and cause blockage right under your seat, at the floor drain. Other no no's we've pulled out of toilet pipes: tampons, diapers, kitty litter, "flushable" wipes and grease clogs. Also, never flush your leftover prescription medication, it breaks down in the sewer system and contaminates the water supply.
DO keep a trashcan in your bathroom and tell your kids to remember to throw all their garbage in there, except toilet paper. But don't keep the wastebasket under the sink - bumping the drain pipes can cause leaks.

Showers/Tubs:

DO pour two to three gallons of very hot water down shower/tub drains once per month to prevent excess build-up of hair and grease. Toilets are not made for very hot water, but tubs are.
DON'T rip apart the shower trying to install a new faucet, or trying to remove a clog. If you go in without any prior knowledge, you risk causing extensive damage and then having to call us to fix it. Make sure to do preventative maintenance on your plumbing, but call a professional handle bigger tasks.

When in doubt, call or text The Plumbinator! (512) 786-1771 .

Four Types of Yard Leaks in Austin — How to Spot Them & What to Do Next

Tue, 05 May 2026 17:57:47 GMT

Four Types of Yard Leaks in Austin — How to Spot Them & What to Do Next

If the weather is dry but your yard is wet, there’s a good chance you’ve got a yard leak — and depending on the source, it can cause costly or even dangerous damage.

Most Austin-area yards have four major underground systems running through them:

Main Water Line (Service Line)
Sewer Line
Gas Line
Irrigation (Sprinkler) System

Each one has its own warning signs. Let’s break down what to look for — and what to do next.

Your dog comes inside with muddy paws… but there hasn’t been a drop of rain in days. You look outside and see a soggy patch, standing water, or unexpected mud in the grass.

1. Signs of a Main Water Line Leak

Your main water line delivers water from the City’s meter to your home. When it leaks, you’ll often notice changes both inside and outside the house.

Common signs you may have a main water line leak:

✔ Sudden spike in your water bill✔ Puddles or muddy areas in the yard✔ Constant sound of running water when fixtures are off✔ Lower-than-usual water pressure✔ Water surfacing in low spots

Important: A puddle in the yard does not mean the leak is directly below it. Water often travels underground and rises in a different area.

➤ How we accurately find the leak

The Plumbinator uses specialized acoustic leak detection equipment to pinpoint the exact location of a main line leak — so you don’t end up with unnecessary trenches across your lawn. Learn more about our process:

Once we locate the leak, we dig one small access hole and repair it cleanly and quickly.

2. Signs of a Sewer Line Leak

A sewer line leak can show up with less water — but a lot more smell.

Signs of a sewer leak in your yard:

✔ Strong sewer odor

✔ A patch of grass that’s greener or grows faster

✔ Soggy ground along the sewer line path

✔ Rats suddenly appearing in the yard

✔ Slow drains or recurring backups in the home

Homes built 1950–1986 are especially vulnerable. Cast iron sewer pipes only last around 50 years, and many Austin homes are now past that lifespan.

If your home falls in that range, read this next:

➤ How we diagnose a sewer leak

We perform a sewer camera inspection to locate breaks, cracks, deterioration, or root intrusion. Fast action prevents sewage backup and major foundation damage.

3. Signs of a Gas Line Leak (Emergency)

Gas line leaks in the yard are dangerous and urgent . Treat them as an immediate emergency.

Warning signs:

✔ Smell of rotten eggs✔ Hissing or whistling noises✔ Dead or discolored grass along a pipeline path✔ Bubbles in wet soil✔ Headaches, nausea, or dizziness outdoors

If you suspect a gas leak:

⛔ Do not dig

⛔ Do not turn lights or appliances on/off

⛔ Do not use matches, lighters, or smoke

⛔ Evacuate people and pets

⛔ Call us immediately

We will:

Perform a whole-house gas pressure test
Pinpoint the exact leak
Repair it safely and legally

Learn more:

Never let an unlicensed person work on gas. It’s illegal and extremely dangerous.

4. Signs of an Irrigation (Sprinkler) System Leak

Irrigation leaks are common, especially in neighborhoods with older systems or heavy soil shifting.

Signs include:

✔ Water spurting between sprinkler heads✔ One zone that stays soggy✔ Constantly damp area near one sprinkler✔ A “geyser” when the system turns on✔ Higher-than-normal water bills

Can irrigation systems leak if they’re turned off?

Yes.If a valve doesn’t seal properly or a line is cracked, water continues moving through the pressurized supply line — even when the timer is off.

If you see a sprinkler-related leak, we can diagnose it and refer a trusted irrigation specialist for the repair.

Frequently Asked Questions (FAQ)

Have a Yard Leak in Austin? We’ll Find It & Fix It Fast.

Yard leaks can waste hundreds of gallons, damage your home, or become unsafe quickly. The Plumbinator specializes in:

✔ Main water line leaks

✔ Sewer line leaks

✔ Gas line yard leaks

✔ Irrigation leak diagnosis

✔ High-tech leak location

✔ Fast, clean, minimally invasive repairs

�� Call or text: (512) 786-1771

Serving Austin, Round Rock, Cedar Park, Hutto, Pflugerville, Leander, Georgetown & surrounding areas.

Help! I’ve Got a Mystery Water Leak in the Austin Area — What Should I Do?

Tue, 05 May 2026 16:57:14 GMT

Help! I’ve Got a Mystery Water Leak in the Austin Area — What Should I Do?

Many Austin homeowners call multiple plumbers, only to be left with:

Walls torn open
Ceilings ripped apart
Concrete jackhammered
Yard holes everywhere
Expensive bills
…and the leak STILL not found or fixed

This is where The Plumbinator is different.

We find the leak AND fix it, in the same visit —without destroying your home in the process.

You notice a wet spot on the ceiling… and it keeps getting bigger.But there’s no bathroom, no kitchen, and no water source above it.

 You’ve just discovered one of the most frustrating homeowner problems: a mystery water leak.

The Plumbinator Difference: Leak Detection Done Right

⭐ Advantage 1: We Find It AND Fix It

Most plumbers either:

Locate leaks but won’t repair them

Try to repair leaks they can’t actually find

We do both, with a 95% success rate in the first 90 minutes.

We are licensed plumbers AND trained leak detection specialists with the right equipment, the right training, and the right solutions.

We get called to houses all the time where the plumber charged an arm and a leg, ripped up the walls or ceiling and never even found the leak. Or maybe they did manage to find the leak, but didn't want to mess with fixing it. Now you're left hanging, forcing you to do more research and make more phone calls to find a plumber who has time and expertise to come fix your leak quickly.

What To Do If You Have a Mystery Water Leak

Follow this simple 3-step process to protect your home and avoid costly damage:

Step 1 — Call to Schedule Leak Detection

�� (512) 786-1771

We bring high-tech equipment to pinpoint the exact location of the leak.

Leak Location Fee:
$550 for the first 90 minutes
$300 per hour after
We find 95% of leaks within the first 90 minutes

This small investment often prevents thousands in unnecessary repairs.

Step 2 — Get a Clear Repair Plan + Upfront Estimate

Your plumber will:

✔ Show you exactly where the leak is

✔ Explain whether repair or reroute is the best option

✔ Provide a written, per-job price (not hourly)

✔ Answer all your questions

✔ Review repair timelines and minimal access points

Leak detection and repair pricing are separate so you get transparency and no surprises.

Step 3 — Approve the Estimate & Fix the Leak

Many leaks can be repaired same day . If not, we schedule within a day or two.

If you decline the repair estimate, you only pay for the leak detection service.

Advantage 2: High-Tech Leak Detection Equipment

We use advanced d iagnostic tools most general plumbers don’t own and aren’t trained to operate.

How our leak detection equipment works:

When water escapes a pipe, it creates vibrations.
These vibrations travel along the pipe, into the ground, and through structural materials.
With electro-acoustic listening tools, we amplify these signals.
Using sensitive microphones and headsets, we isolate the sound of the leak.

This lets us:

Detect leaks behind walls
Pinpoint leaks under floors
Locate leaks beneath concrete
Identify hot and cold line failures
Find slab leaks without jackhammering

If the acoustic equipment isn’t enough…

We use a “sniffer” system that detects moisture patterns and subtle pressure changes to narrow down the exact leak location.

This technology dramatically reduces guesswork—an d damage.

Advantage 3: Minimally Invasive ‘Keyhole Surgery’ Repairs

Once we locate the leak, we perform precise, minimally invasive access to fix it.

Think of it as plumbing keyhole surgery:

✔ Small, clean access points✔ No unnecessary demolition✔ No tearing up flooring✔ No giant holes✔ Clean repairs and clean workspaces

We repair:

Slab leaks
Wall leaks
Ceiling leaks
Manifold leaks
Hidden fixture leaks
Underground supply leaks

This approach preserves your:

Home
Flooring
Foundation
Yard
Budget
Sanity

Common Mystery Leak Symptoms in Austin-Area Homes

If you notice any of these signs, call immediately:

Wet ceiling spots
Water stains with no visible source
Sudden spike in water bill
Sound of running water when fixtures are off
Hot floor spots (indicates slab leak)
Damp carpet or warped flooring
Moldy smell or visible mildew
Bubbling paint on walls or ceilings
Low water pressure

Even small leaks can lead to:

structural damage
wood rot
electrical hazards
black mold growth

Act fast to prevent long-term damage.

FAQ: Mystery Water Leaks in the Austin Area

Don’t Let a Leak Destroy Your Home — Call The Plumbinator

We find and fix leaks FAST, without tearing your home apart.

✔ Licensed & insured✔ High-tech leak detection✔ No-guess repairs✔ Minimal damage✔ Honest, upfront pricing

�� Call or text: (512) 786-1771

Serving: Austin, Round Rock, Hutto, Georgetown, Cedar Park, Leander & surrounding areas.

Do I Need to Hire a Licensed Plumber in Austin? Your Essential Guide for Homeowners

Tue, 05 May 2026 16:29:41 GMT

Do I Need to Hire a Licensed Plumber in Austin? Your Essential Guide for Homeowners

In Texas, you must hire a licensed plumber if the work involves:

✔ Gas lines (natural or LP)

Absolutely mandatory — gas work is high-risk and strictly regulated.

✔ Water heaters

Installations or repairs always require licensing.

✔ Sewer lines or drain systems

Root intrusion, replacements, and repairs are licensed-only.

✔ Underground piping

Including slab leaks or tunneling work.

✔ Work requiring a permit

Such as major pipe replacements, structural changes, or venting.

✔ Anything beyond simple fixture swaps

If it involves internal piping, code compliance, or safety concerns, it must be done legally.

Plumbing problems can be stressful — especially when you’re standing over a leak, clogged drain, or a water heater that just stopped working. One of the most common questions Austin homeowners ask is:

Do I need a licensed plumber, or can I fix this myself?

In Texas, the law is very clear:

You only have TWO legal options for plumbing repairs:

Do the work yourself (as the homeowner)
Hire a state-licensed plumber working under a valid Master Plumber license

Anything else—including handyman plumbing—is illegal and can void insurance coverage.

This guide explains everything you need to know to stay safe, avoid fines, and protect your Austin-area home.

What Are the Risks of Hiring an Unlicensed Plumber?

Choosing an unlicensed person — including a handyman — can lead to:

⚠️ Illegal Work (Texas Law Violation)

Only homeowners or licensed plumbers working under an active Master Plumber may perform plumbing work in Texas.

Hiring an unlicensed person violates state law and can result in fines, unsafe installations, and insurance denial .

⚠️ Unsafe Repairs

Unlicensed workers often lack code training, resulting in:

Gas leaks
Carbon monoxide hazards
Flooding
Mold
Sewer backups
Fire hazards

⚠️ No Insurance Coverage

Texas homeowners insurance denies claims when work is done by:

❌ a handyman❌ an unlicensed plumber❌ an insured person doing illegal work

You could be left paying thousands out of pocket.

When Is It Mandatory to Hire a Licensed Plumber for Home Repairs?

Do I Need a Licensed Plumber for Simple Jobs Like a Faucet or Toilet Replacement?

Sometimes yes, sometimes no.

Homeowners may legally perform some small repairs, including:

Replacing a faucet
Switching out a toilet
Replacing supply lines
Installing showerheads

But you must hire a licensed plumber if the repair includes:

Pipe modifications
Valve replacements
Leak repairs inside walls
Drain repairs
Gas-connected fixtures
Anything requiring a permit

And remember: Even a “simple” faucet installation can cause flooding, structural damage, or insurance issues if done incorrectly. When in doubt, call a licensed professional.

Can Homeowners Legally Do Their Own Plumbing in Texas?

✔ Yes — with limitations.

Homeowners may NOT work on gas plumbing

If your repair involves natural gas or LP gas, you legally cannot touch it.

According to the Texas State Board of Plumbing Examiners (TSBPE): Gas work must be performed by a licensed plumber due to the risk of explosion, carbon monoxide poisoning, and fire.

✔ Homeowners may perform simple, non-gas plumbing tasks

Examples include:

Replacing a toilet
Installing a faucet
Switching out supply lines
Installing a showerhead

However, many plumbing tasks require permits, even for homeowners.

Before starting any project involving drainage, venting, or major repairs, call your local permitting office for guidance.

✔ When to call a licensed professional

Call a plumber immediately if the repair involves:

Gas lines
Sewer lines
Underground piping
Plumbing inside walls
Water heaters
Permit-required work
Anything you’re unsure about

What are the risks of hiring an unlicensed plumber?

It is illegal in Texas.

Handymen are not legally allowed to perform any plumbing tasks, including “small jobs” like:

Replacing faucets
Swapping toilets
Installing garbage disposals
Repairing leaks
Working on sewer lines
Working on supply lines

Penalties for illegal plumbing

Minimum $2,000 fine
Names published on the state’s enforcement actions list
Handyman’s insurance does not cover illegal plumbing
Homeowners’ insurance denies claims for damage caused by unlicensed work

⚠️ Why handyman plumbing is dangerous

Unlicensed work often leads to:

Flooding
Mold growth
Gas leaks
Sewer gas exposure
Fire hazards
Carbon monoxide poisoning

And because it’s illegal, you pay out of pocket for the damage.

Real Case in Round Rock (True Story)

What you're seeing in the photo below is handyman work that almost killed one of our Round Rock customers. A handyman vented her gas water heater into the attic (instead of out the roof) and that metal pipe spewed out carbon monoxide into her house for an entire year. She was having headaches and nausea every day and couldn't figure out why. If that's not bad enough, that metal pipe is also butted right up against that wood, which is illegal and a fire hazard. They've also drilled the hole through a load-bearing glue lam. Our customer could've died from poisoning, fire AND second floor collapse at any time in the last year, all from one person's shoddy work.

FAQs: Licensed Plumbers in Texas

Need a Licensed Plumber in Austin? We’re Ready to Help.

Whether you’re dealing with leaks, backups, gas concerns, or water heater issues, we’ll take care of it quickly, legally, and safely.

�� Call The Plumbinator: (512) 786-1771

Serving Austin, Round Rock, Hutto, Georgetown, Cedar Park, Leander & surrounding areas.

7 Austin-Area Trees That Cause the Most Plumbing Damage

Tue, 05 May 2026 15:11:22 GMT

7 Austin-Area Trees That Cause the Most Plumbing Damage

Austin’s soil and climate create the perfect conditions for root intrusion.

Clay soil shifts easily: This movement can crack old pipes or loosen joints, giving roots the perfect entry point.
Periods of drought drive roots toward water sources: Tree roots naturally seek moisture—and your sewer line provides a continuous supply.
Older homes (1950–1986) used cast iron pipes: Cast iron corrodes, flakes, and cracks as it deteriorates. These cracks release tiny amounts of vapor that roots can detect from yards away .
Roots can grow 2–7× the height of the tree: A 40-foot tree may have roots extending 80–280 feet. If you live in Round Rock, Austin, Georgetown, Pflugerville, Leander, or Hutto, root-damaged sewer lines are one of the top plumbing issues we see every week.

(and how to know if your yard is at risk)

If you own a home in Central Texas, the trees in your yard could be quietly destroying your sewer line. Some tree species have aggressive, moisture-seeking roots that break into aging pipes, clog drains, and cause expensive sewer damage—especially in Austin-area homes built before 1986.

Before you face a messy backup or yard excavation, here’s how to tell whether the trees around your property are putting your plumbing at risk.

Why Tree Roots Damage Sewer Lines in Austin

Tree roots can exploit tiny cracks or holes in your sewer pipes, and use them to invade! It's a very common problem in Central Texas to have tree roots clog, crack and even completely destroy parts of sewer lines. Did you know that tree roots can be 2-7 times as long as the tree is tall? These roots will travel long distances seeking water. Roots can actually sense water vapor, and will follow the trail of leaking moisture straight back to small cracks, badly sealed joints, or pinholes in your pipes.

Tree roots will invade your sewer pipes!

How Roots Invade Your Sewer Pipes

Roots don’t need a large opening—just a hairline crack or poorly sealed joint.

Once inside the pipe:

They form thin, hair-like root masses
These catch toilet paper, grease, and debris
The blockage slows or stops waste flow
The roots thicken, exert pressure, and crack the pipe further
Eventually, the pipe can collapse or fail completely

This process can happen quickly and silently—until backups or yard flooding appear.

Signs You Have Roots in Your Sewer Line

If you notice any of these symptoms, your sewer pipe may already be compromised:

Frequent toilet clogs
Gurgling noises from drains or toilets
Multiple drains backing up at once
Slow drains throughout the home
Sewage smell in the yard
Wet or mushy spots in grass
Areas of sudden plant overgrowth
Recurring clogs despite snaking
Home built before 1986 with cast iron pipes

If any of these sound familiar, schedule a sewer camera inspection immediately.

When you call The Plumbinator, we will run a special, high-tech camera down your line to see if your pipe looks like the one in the video image above, or the pipe depicted below.

Do You Have a Cast Iron Sewer System?

Homes built between 1950–1986 in the Austin area almost always have cast iron sewer lines.

These aging systems are:

Brittle
Corroded
Flaking internally
Highly vulnerable to root intrusion

If this is your home’s age range, root invasion is extremely common .

When to Call a Plumber Immediately

Call The Plumbinator right away at (512) 786-1771 if you notice:

Sewage backing up inside the home
Raw sewage in the yard
Strong sewer smell around your house
Toilets bubbling when you run water
All drains slowing at once

These are signs of major blockages or pipe failure.

If you do have roots in your sewer pipes, call The Plumbinator and we'll pull them out, like Tim did below. Yikes!

Top 7 Trees That Cause Sewer Line Damage in Central Texas

These species are the most likely to send roots toward your sewer line:

1. Sycamore

Large, fast-growing, and highly aggressive roots.

2. Willow

Water-loving roots that seek moisture from damaged pipes.

3. Oak

Strong lateral roots that travel far and penetrate weakened joints.

4. Maple

Dense, fibrous roots known for clogging older cast iron systems.

5. Aspen

Sends out long-running suckers, often invading pipe seams.

6. Elm

Fast-growing roots that overwhelm aging infrastructure.

7. Birch

Surface-level roots that spread wide and follow moisture vapor trails.

If any of these trees are located near your sewer line, you should monitor your system regularly.

Safer Trees to Plant Near Sewer Lines

If you’re planning new landscaping, consider trees with more contained root systems:

Mediterranean fan palms
Fruit trees (many varieties)
Certain cypress and cedars
Wafer ash
Sabal palmetto
Magnolia

These species pose a lower risk of invading sewer pipes.

How The Plumbinator Removes Roots (Our Process)

Here’s what happens when you call us for a root intrusion issue:

1. Sewer Camera Inspection

We run a high-definition camera through your sewer line to pinpoint root locations, cracks, or collapsed pipe sections.

2. Root Removal

We mechanically remove roots using specialized tools designed to clear the pipe without damaging what's left.

3. Pipe Assessment

We determine whether you simply need clearing—or if the pipe is weakened and requires spot repair or replacement.

4. Permanent Solutions

Depending on the condition of your sewer system, we discuss:

Pipe replacement
Trenchless options
Cast iron replacement
Cleanout installation
Preventative maintenance

FAQ: Tree Roots & Sewer Lines

Worried About Roots in Your Sewer Line? Call Us Today.

If your home has older pipes, large trees nearby, or any signs of sewer line trouble, The Plumbinator can diagnose the issue fast.

�� Call (512) 786-1771 for a same-day camera inspection

Serving Austin, Round Rock, Georgetown, Hutto, Cedar Park, Leander, and surrounding areas.

Slab Leak Near Me: How to Find, Fix, and Repair a Slab Leak

Tue, 05 May 2026 14:51:14 GMT

Slab Leak Near Me: How to Find, Fix, and Repair a Slab Leak

Oh no! You just went to grab a soda from the fridge and splashed through a huge puddle on the way. Why is your home turning into a swimming pool?? It might be a slab leak .

Slab leaks can wreak havoc on your home and your wallet! Not only will your house be underwater, but you'll also be paying for this privilege through increased bills. The water pipes for your home run through the concrete foundation, and as they get old and corrode—or the house settles into its foundation—pipes may spring leaks or break. The older your home is, the more likely it is you’ll face a slab leak.

Many homeowners ask: “How to fix slab leak?” “How to find slab leak?” and “Can a slab leak be fixed?” Let’s break down the signs you should watch for and what slab leak repair really involves.

Our Master Plumber will find and fix any leak.

Six Signs you may have a slab leak

1) There's a Puddle on the Floor, Inside or Outside

The most common sign of a slab leak is a puddle on the floor that grows larger over time as water bubbles up from underneath. You’ll often find the puddle near plumbing-heavy rooms like bathrooms, kitchens, or laundry areas.

What to do: Look around carefully to make sure the leak isn’t coming from an appliance. If you can’t find the source, call a plumber right away and mention you suspect a slab leak.

2) Sky High Water or Heating Bills

You open your water bill and your jaw drops. How could you have used so much water? If there is no obvious reason your bill is sky high, and the change is sudden, you might have a slab leak on your hands.

A little-known sign of a leak is a high heating bill. Having a hot water leak in your slab is the same as leaving your hot water running around the clock, which means your hot water heater is also running 24/7, using a ton of electricity or gas.

Make sure to move boxes in closets and feel under them with your feet for wetness.

3) Warped Wood Floors or Damp Carpet

Look up at the ceilings too.

Water bubbling up from a slab leak accumulates and often comes up under your carpeting or wood floors. Keep an eye out for warped wood flooring or dark and/or damp areas on your carpet.

4) Your Hardwood or Tile Floor is Suddenly Hot

Did you recently install heated floors? No? Well then why are your floors suddenly so nice and toasty? If you read number two above, then you know why. You've got a hot-side slab leak that is running 24/7 and heating up your floors from below. Unfortunately, those nice warm floors are costing you a bundle to heat all that water!

If you have carpeting, you probably won't detect the hot spot right away. If you have pets, you may notice them lying in a certain spot repeatedly on cool days, so check the floor there to see if its warmer than surrounding areas.

5) Low Water Pressure

With so much water flowing out of leaks or breaks in the pipes, that leaves less water to travel to your fixtures, resulting in sudden low water pressure. If you're not using water at the same time anywhere else in the house, like the washing machine or the shower, you could have a slab leak that's "stealing" your water pressure.

6) Bad or Musty Smells

If water from a slab leak bubbles up under your carpet, mold and mildew growth will soon follow. If the leak wicks up into the drywall, you could also develop mold in your walls. While these types of mold growth are usually not visible, you will definitely start to smell them! So if areas of your house suddenly smell musty, check this list for other signs of a slab leak. Mold is not good for your health or the health of your house.

Always keep an eye out around your home for mold

If you think you have a slab leak or yard leak in Georgetown, Round Rock, Austin, Hutto, Cedar Park, or Pflugerville, call The Plumbinator at (512) 786-1771 .

We will find your leak, wherever it hides

Don’t Wait—Call the Leak Specialists

Want Endless Hot Showers NOW? Five Signs a Tankless Water Heater is Right For Your Family

Tue, 05 May 2026 14:31:55 GMT

Want Endless Hot Showers NOW? Five Signs a Tankless Water Heater is Right For Your Family

Five Signs You May Need a Tankless Water Heater

If you’ve been thinking about upgrading your home’s hot water system, you’ve probably come across tankless water heaters for sale. But how do you know if it’s time to make the switch? Here are five signs you may need a tankless water heater in your home.

1) Do you have a large family and/or often run out of hot water?

Large households tend to use a lot of hot water—showers, laundry, and dishes add up quickly. Traditional tank water heaters store a limited amount of hot water. Once the tank runs out, you’re stuck waiting for it to reheat.

Tankless water heaters, on the other hand, heat water on demand. That means no more staggering showers or fighting over who gets the hot water first. If you’re searching for tankless water heaters for large homes, this upgrade may be perfect for you.

2) Do you have a bulky heater in a small space?

Standard water heaters often take up valuable floor or closet space. A tankless system is wall-mounted and much more compact. Even better, they can be installed inside or outside , depending on your home setup.

3) Do you want to save energy and money?

One of the biggest benefits of going tankless is energy efficiency. Traditional tanks constantly heat stored water, even when you’re not using it—wasting energy and money. Tankless heaters only heat water when you need it.

4) Do you worry about your water heater leaking and destroying your flooring, walls, and ceiling, plus causing black mold?

Tank water heaters can leak, leading to costly damage and even black mold growth. Since tankless systems don’t store water, the risk of leaks is much lower.

Tankless water heaters create hot water fresh on demand, giving you peace of mind and protecting your home.

5) Are you tired of repairing or replacing your heater after your 6-year warranty runs out?

Traditional water heaters typically last around 6–8 years. Many tankless systems, like Navien, offer 15-year warranties on heat exchangers and can last up to 20 years with proper maintenance.

Yes, the initial investment is higher, but you’ll save on repairs, energy costs, and replacement fees over the long run.

Gas vs. Electric Tankless Water Heaters

Final Thoughts

If you’re still wondering whether a tankless water heater is right for you, call us today at (512) 786-1771 for a free estimate. Our Master Plumber is certified with Navien and Bradford-White to install and repair tankless water heaters, so you’ll always know who to call for service.

* A Note about Brands: Our Master Plumber is certified through the Navien and Bradford-White companies to install and repair gas tankless water heaters that we install, so we install these brands exclusively and thus require your house to have a gas hookup. He is also certified through the companies to repair tankless heaters, so you will always know who to call in the unlikely event your heater breaks down sometime in the future.

Water Heater Leaving You Out in the Cold? Here’s What to Do.

Mon, 04 May 2026 19:42:54 GMT

Water Heater Leaving You Out in the Cold? Here’s What to Do.

Why Replace Your Old Water Heater?

Cold showers? Inconsistent water temps? If your water heater is struggling to keep up, it may be time for an upgrade. At The Plumbinator , we specialize in water heater installation in Round Rock, TX —with flat-rate pricing, expert service, and same-week availability.

Whether you have a 40-gallon electric heater , a natural gas unit , or you’re thinking about going tankless, we’ll help you choose the right solution for your home, family, and budget.

If your water heater is more than 8–10 years old, it may be costing you more than you think. Here's why replacing it now can save you in the long run:

Lower Energy Bills New water heaters are more energy-efficient, using less electricity or gas to do the same job—especially if your old unit is running constantly to reheat water.
Avoid Emergency Leaks Aging water heaters can rust out, leak from the bottom, or burst unexpectedly—causing major water damage in your garage, attic, or closet.
Hot Water When You Need It No more running out halfway through your shower. A properly sized, newly installed heater keeps everyone happy (and clean).
Keeps You Up to Code Every year, plumbing code requirements change. New installations make sure your home is safe and compliant—especially if you’re planning to sell.

Standard Water Heater Install – $2,500

If your current water heater is installed in a garage closet (common for homes in Round Rock and Pflugerville),$2500

Includes :

40-gallon Lochinvar or Bradford White tanked water heater (Upgrade to 50-gallon for $125 more)
New hot and cold flex lines – to meet current plumbing code
New shut-off valve – improves safety and ease of use
Full installation by a licensed and insured plumber
Haul-away and proper disposal of your old water heater

Fast service. Honest pricing. Expert craftsmanship.

Add-Ons & Special Situations (When Required)

Some installs need a few extras based on location, gas type, or local codes:

Expansion tank – $250, Required in some cities to reduce pressure and protect your pipes & fixtures.
Drip leg (gas heaters only) – $125, Helps trap debris before it reaches your burner.
Permit fees – Actual cost, We’ll pull any required city or county permit and bill it directly—no markup.
New pan line (if needed) – $250–$500, Required for proper drainage and code compliance.
Attic or second-floor installs – Add $200, These jobs require more time and care, but we’ve got it covered.

Why Homeowners Choose The Plumbinator

We’re not just another plumbing company—we’re your local, family-owned experts focused on leak detection and residential plumbing done right. Here’s what makes us different:

Licensed and insured plumbers (no subcontractors)
Fair, flat-rate pricing with no hidden fees
Top-rated Lochinvar and Bradford White units
Expert diagnostics and leak repair
Friendly, respectful service that shows up on time

Curious About Tankless Water Heaters?

We’re Navien tankless water heater experts —perfect for homeowners looking for energy savings and endless hot water. If you’re ready to explore the upgrade, we’ll walk you through your options and handle the full install.

Ready to Replace Your Water Heater?

Call The Plumbinator today at 512-786-1771 to schedule your water heater replacement or ask about our tankless options. We serve Round Rock, Pflugerville, Hutto, Georgetown, and beyond.

Don’t wait for a cold surprise—book your installation now and get back to hot water you can count on.

Kitec Pipes in Austin? Repair or Replace Guide

Fri, 11 Oct 2024 19:12:58 GMT

Got Kitec Water Pipes in Austin? Here’s What You Need to Know — And How We Can Help

If you just found out your home has Kitec plumbing , your first reaction might be panic—especially if you’ve already received a quote for a full pipe replacement that sounds more like a car down payment. But don’t stress just yet.

At The Plumbinator , we offer Kitec plumbing repair and replacement services in Austin, Round Rock, Georgetown, Pflugerville , and the surrounding areas. And in many cases, we can repair your system instead of replacing the whole thing right away.

�� Contact us today for a free estimate and we’ll help you figure out the best (and most affordable) next step.

What Is Kitec Plumbing and Why Is It a Problem?

Kitec was a popular water piping system installed in new homes across Central Texas between 1995 and 2008 . Builders loved it because it was more affordable than copper, flexible, and easy to install. Unfortunately, homeowners are now paying the price.

Here’s what you need to know:

Kitec pipes are made from a mix of plastic and aluminum —which can’t handle high heat or water pressure .
The fittings, often made from brass containing high levels of zinc , are prone to dezincification , which causes corrosion and weakening over time.
The manufacturer recalled Kitec in 2005 , but builders continued to use it in Austin and nearby cities until as late as 2008.
When Kitec fails, it doesn’t just drip—it bursts , often without warning, causing severe water damage .

If your home was built between 1995–2008 in the greater Austin area, there’s a good chance you may have Kitec plumbing hidden behind your walls.

How to Tell If You Have Kitec Pipes

Not sure if your home has Kitec? Here’s what to look for:

Pipes labeled "Kitec", "KTC", or "PlumbBetter"
Blue and orange flexible tubing near your water heater, under sinks, or near shut-off valves
Brass fittings with white residue (a sign of corrosion)
Frequent water leaks in walls or ceilings

Still not sure? We offer free onsite inspections in Round Rock, Austin, and surrounding areas. We’ll check your system and let you know what you’re dealing with.

Why Are Kitec Replacement Estimates So Expensive?

Most plumbers will immediately recommend a full repipe, and they’re not wrong—Kitec will eventually fail. But the high cost comes down to a few factors:

Parts are discontinued and nearly impossible to find
Supply houses rarely carry Kitec fittings or tubing
Labor-intensive installations or repairs (especially in attics or walls)
Most plumbers don’t want to deal with small repairs if they can’t guarantee long-term reliability

That’s why many homeowners get quotes of $20,000–$30,000+ for a full Kitec water line replacement. But that’s where The Plumbinator is different.

How The Plumbinator Can Help — Repair or Replace

At The Plumbinator, we understand the stress of unexpected plumbing repairs. That’s why we take a more flexible approach.

We offer both Kitec repair and full replacement services depending on your needs and your budget.

Here's how we can help:

We’ve secured a reliable source for discontinued Kitec fittings, so we can often perform targeted repairs to stop small leaks.
Our licensed, insured plumbers will assess the condition of your piping and help you decide the best option—whether it’s a short-term fix or a long-term repipe.
We’ll provide transparent pricing with no pressure and no surprise upsells.
If you’re not ready for a full replacement, a small repair could buy you time and prevent costly flood damage.

Spending a few hundred now to stop a leak is often better than waiting for a full system failure that forces emergency work.

Serving Austin, Round Rock, Georgetown, Pflugerville & Beyond

We’re your local, family-owned plumbing experts , based in Round Rock, TX , and proudly serving:

Austin
Pflugerville
Georgetown
Hutto
Cedar Park
And nearby neighborhoods

We know Texas homes—and we’ve seen more Kitec failures than we can count.

Schedule Your Free Kitec Inspection Today

If you’ve been told your home has Kitec pipes—or you’re experiencing leaks and suspect it might—don’t wait. Let us take a look and help you figure out the most cost-effective solution.

�� Call The Plumbinator at 512-786-1771 or schedule a free estimate online here.

You’ll get honest answers, expert insight, and peace of mind—whether you choose to repair now or repipe later.

Was Your Austin-Area Home Built 1950-1986? Your Sewer Pipes Could Be at Risk

Fri, 11 Oct 2024 17:44:11 GMT

Was Your Austin-Area Home Built 1950-1986? Your Sewer Pipes Could Be at Risk

If you own an older home in Austin, Georgetown, Round Rock, or Pflugerville, there’s a hidden problem lurking beneath your slab foundation — aging cast iron sewer pipes. These pipes, common in homes built between 1950 and 1986, have a limited lifespan and may already be causing costly damage without you realizing it.

Why Are Cast Iron Sewer Pipes a Problem?

Cast iron sewer pipes were the industry standard for decades due to their durability and strength. However, they aren’t built to last forever. The typical lifespan of cast iron pipes is about 50 years , after which they begin to deteriorate, corrode, and develop leaks.

If your home was built:

Between 1950 and 1969 — Your pipes are likely past their prime and should be replaced immediately to avoid raw sewage leaks, flooding, and structural damage.
In the 1970s — Replacement is probably needed within the next 5 to 10 years before major failure happens.

The key takeaway: It’s not if your cast iron sewer pipes will fail, but when.

What Happens When Cast Iron Sewer Pipes Fail?

Once corrosion sets in, cast iron pipes can develop small cracks that quickly turn into leaks. These leaks aren’t just minor annoyances; they can cause:

Foul odors emanating from your yard or basement
Raw sewage leaking into your yard or under your home’s slab
Damage to your home’s foundation and floors
Frequent backups and plumbing issues

Ignoring these problems can lead to severe property damage and expensive emergency repairs.

Why You Should Completely Replace, Not Just Repair

You might wonder why you can’t just fix leaking spots as they appear. The truth is, patch repairs on cast iron pipes are temporary band-aids that often make the problem worse.

Every repair weakens the surrounding metal, creating two new leak points near the repair site over time. These stopgap fixes add up and drain your wallet, while failing to address the root cause: the pipe system is deteriorating as a whole .

Replacing your entire cast iron sewer line all at once is the safest and most cost-effective long-term solution. It protects your home, saves you from repeated costly repairs, and ensures your plumbing is up to modern code.

What About Trenchless Pipe Relining for Cast Iron Pipes?

You may have heard of trenchless epoxy pipe relining as a “less invasive” alternative to replacement. However, for cast iron sewer pipes, relining often isn’t a reliable fix:

Before applying epoxy, the pipes must be cleaned and prepped—this sanding and cleaning process is very harsh and can cause weakened pipes to rupture or crack further .
If the pipes are too deteriorated, relining can’t be completed, and you’ll still need a full replacement anyway.
Even when applied, epoxy liners can trap corrosion underneath , causing ongoing damage and reducing pipe diameter, which restricts sewer flow.
Unlike full replacements, epoxy relining isn’t inspected or regulated by any governmental agency , so quality and durability aren’t guaranteed.
Plus, relining doesn’t fix external corrosion , which is often the primary issue with old cast iron pipes.

In short, trenchless relining may sound like a quick fix, but it’s often just a costly delay before a full replacement becomes unavoidable.

How The Plumbinator Can Help with Cast Iron Sewer Replacement

At The Plumbinator , we are experts in cast iron sewer pipe replacement throughout the Austin metro area, including Round Rock, Pflugerville, Georgetown , and beyond.

We partner with the best excavators to carefully tunnel under your home with minimal disruption to floors and landscaping .
Our licensed plumbers provide full sewer system replacements that meet Texas state plumbing code and local regulations.
We offer camera inspections to pinpoint the exact condition of your sewer pipes and give you a transparent estimate before any work begins.

Replacing your old cast iron sewer pipes with durable modern materials means you can rest easy knowing your home’s plumbing is safe and reliable for decades to come.

Don’t Wait for Sewage to Leak into Your Home

If your home was built between 1950 and 1986, it’s time to act. Don’t wait for a catastrophic sewer failure to cause thousands of dollars in damage.

Call The Plumbinator today at 512-786-1771 to schedule a professional sewer camera inspection and get a no-obligation estimate on your cast iron sewer pipe replacement.

Protect your home from costly sewer backups — trust The Plumbinator, your local licensed plumber experts in sewer pipe replacement!

Related Services:

Water Leak Detection in Round Rock
Water Heater Installation & Replacement
Licensed Plumbing Services in Austin & Round Rock

the-plumbinator

How to Prevent Pipes from Freezing in Austin & Round Rock (Winter Plumbing Guide)

How to Prevent Pipes from Freezing in Austin & Round Rock (Winter Plumbing Guide) ﻿

At What Temperature Do Pipes Freeze in Texas?

Why Pipes Burst

How to Prevent Pipes from Freezing

Water Heater & Irrigation Protection

Do You Need a Plumber After a Freeze?

Frequently Asked Questions About Frozen Pipes in Texas

If you suspect frozen pipes, low water pressure, or water damage after a Central Texas freeze, don’t wait.

Essential DIY Plumbing Hacks for Sinks Toilets Disposals and Beyond

Essential DIY Plumbing Hacks for Sinks Toilets Disposals and Beyond ﻿

Read on for DIY plumbing do's and don'ts.

Water Heaters:

Bathroom Sinks:

Toilets:

Showers/Tubs:

Four Types of Yard Leaks in Austin — How to Spot Them & What to Do Next

Four Types of Yard Leaks in Austin — How to Spot Them & What to Do Next ﻿

1. Signs of a Main Water Line Leak

2. Signs of a Sewer Line Leak

3. Signs of a Gas Line Leak (Emergency)

4. Signs of an Irrigation (Sprinkler) System Leak

Frequently Asked Questions (FAQ)

Have a Yard Leak in Austin? We’ll Find It & Fix It Fast.

Help! I’ve Got a Mystery Water Leak in the Austin Area — What Should I Do?

Help! I’ve Got a Mystery Water Leak in the Austin Area — What Should I Do?

The Plumbinator Difference: Leak Detection Done Right

What To Do If You Have a Mystery Water Leak

Step 1 — Call to Schedule Leak Detection

Step 2 — Get a Clear Repair Plan + Upfront Estimate

Step 3 — Approve the Estimate & Fix the Leak

Advantage 2: High-Tech Leak Detection Equipment

How our leak detection equipment works:

If the acoustic equipment isn’t enough…

Advantage 3: Minimally Invasive ‘Keyhole Surgery’ Repairs

Common Mystery Leak Symptoms in Austin-Area Homes

FAQ: Mystery Water Leaks in the Austin Area

Don’t Let a Leak Destroy Your Home — Call The Plumbinator

Do I Need to Hire a Licensed Plumber in Austin? Your Essential Guide for Homeowners

Do I Need to Hire a Licensed Plumber in Austin? Your Essential Guide for Homeowners ﻿

Do I need a licensed plumber, or can I fix this myself?

What Are the Risks of Hiring an Unlicensed Plumber?

When Is It Mandatory to Hire a Licensed Plumber for Home Repairs?

Do I Need a Licensed Plumber for Simple Jobs Like a Faucet or Toilet Replacement?

Can Homeowners Legally Do Their Own Plumbing in Texas?

What are the risks of hiring an unlicensed plumber?

Penalties for illegal plumbing

﻿

⚠️ Why handyman plumbing is dangerous

Real Case in Round Rock (True Story)

FAQs: Licensed Plumbers in Texas

Need a Licensed Plumber in Austin? We’re Ready to Help.

7 Austin-Area Trees That Cause the Most Plumbing Damage

7 Austin-Area Trees That Cause the Most Plumbing Damage ﻿

Why Tree Roots Damage Sewer Lines in Austin

How Roots Invade Your Sewer Pipes

Signs You Have Roots in Your Sewer Line

Do You Have a Cast Iron Sewer System?

When to Call a Plumber Immediately

Top 7 Trees That Cause Sewer Line Damage in Central Texas

Safer Trees to Plant Near Sewer Lines

How The Plumbinator Removes Roots (Our Process)

1. Sewer Camera Inspection

2. Root Removal

3. Pipe Assessment

4. Permanent Solutions

FAQ: Tree Roots & Sewer Lines

Worried About Roots in Your Sewer Line? Call Us Today.

Slab Leak Near Me: How to Find, Fix, and Repair a Slab Leak

Slab Leak Near Me: How to Find, Fix, and Repair a Slab Leak ﻿

Six Signs you may have a slab leak

1) There's a Puddle on the Floor, Inside or Outside

2) Sky High Water or Heating Bills

3) Warped Wood Floors or Damp Carpet

4) Your Hardwood or Tile Floor is Suddenly Hot

5) Low Water Pressure

6) Bad or Musty Smells

Don’t Wait—Call the Leak Specialists

Want Endless Hot Showers NOW? Five Signs a Tankless Water Heater is Right For Your Family

How to Prevent Pipes from Freezing in Austin & Round Rock (Winter Plumbing Guide)

Essential DIY Plumbing Hacks for Sinks Toilets Disposals and Beyond

Four Types of Yard Leaks in Austin — How to Spot Them & What to Do Next

Do I Need to Hire a Licensed Plumber in Austin? Your Essential Guide for Homeowners

7 Austin-Area Trees That Cause the Most Plumbing Damage

Slab Leak Near Me: How to Find, Fix, and Repair a Slab Leak

Was Your Austin-Area Home Built 1950-1986? Your Sewer Pipes Could Be at Risk